
meterN 0.9
Re: meterN 0.9
You're welcome. It's weird the issue didn't show on my system 

Re: meterN 0.9
I did not have the problem but installed update and all is working perfectly
Thanks
Nev
Thanks
Nev
Re: meterN 0.9
me too, no problem after updating to 0.9
thanks jeanmarc
thanks jeanmarc
-
- Posts: 108
- Joined: Tue Apr 14, 2015 9:25 am
Re: meterN 0.9
Hi Jeanmarc
i have updated from metern 0.8.9 to last 0.9.1
the update is going well, but i have only one strange thing
i'm using gas monitor with esp_request and i show total value in "indicators not logged" using command:
it works because give back the result

but on main panel i can't see it




with the previuos version i was able to see in the box the value.
now i see only the dots
why?
the csv is updated:
the second last is the value of the gas: 1244.72
thanks
i have updated from metern 0.8.9 to last 0.9.1
the update is going well, but i have only one strange thing
i'm using gas monitor with esp_request and i show total value in "indicators not logged" using command:
Code: Select all
req_espeasy -total
20(1244.72*m3) is a valid entry !

but on main panel i can't see it




with the previuos version i was able to see in the box the value.
now i see only the dots
why?
the csv is updated:
Code: Select all
12:45,33220435,25797070,82821532,59096830,122826,14.4,26.9,0,14184,,50.94,,33.94,16.88,230.60,20.1,33.7,20.4,29.6,1244.72,45
12:50,33220607,25797328,82821532,59096916,122998,15.2,26.5,0,14184,,50.06,,32.62,16.88,229.00,20.1,34.4,20.6,31.7,1244.72,44.5
12:55,33220813,25797596,82821532,59096978,123204,2.4,26.2,0,14184,,49.19,,32.62,28.50,228.40,20.3,34,20.6,32.9,1244.72,44.2
13:00,33220981,25797872,82821532,59097086,123372,2.4,26.2,0,14184,,48.06,,33.81,25.25,228.20,20.2,33.3,20.7,33.6,1244.72,43.3
thanks
Re: meterN 0.9
Hi,
You can set it in "Meter(s) and sensor(s) configuration" "Dashboard live pooling" or in "Indicator(s) configuration".
It's look like you disable the "live pooling". Could you set the live command in meter's config and give it a try ?
Also, you could also do a "Test command" in indicators ?
You can set it in "Meter(s) and sensor(s) configuration" "Dashboard live pooling" or in "Indicator(s) configuration".
It's look like you disable the "live pooling". Could you set the live command in meter's config and give it a try ?
Also, you could also do a "Test command" in indicators ?
-
- Posts: 108
- Joined: Tue Apr 14, 2015 9:25 am
Re: meterN 0.9
Hi, but it's configurated in indicator(s) configuration you can see in the image. this is the table only for indicators not logged:jeanmarc wrote: ↑Sun Dec 30, 2018 1:54 pm Hi,
You can set it in "Meter(s) and sensor(s) configuration" "Dashboard live pooling" or in "Indicator(s) configuration".
It's look like you disable the "live pooling". Could you set the live command in meter's config and give it a try ?
Also, you could also do a "Test command" in indicators ?

the test command works perfectly
Code: Select all
req_espeasy -total
i can see on dashboard:20(1244.72*m3) is a valid entry !
this is the dashboard image, you can see that is showed in indicators logged but not in indicators not logged

but not in idicator(s)
if i test the command on dashboard or in indicators is working in both side
the strage thing is that i do not change nothing and in previuous version was showed. maybe the "space" of the grid is not enouth to show the numbers?
the live command i have not setted because to me is not usefull, so i disable it (was disabled also for in the previous version)
-
- Posts: 108
- Joined: Tue Apr 14, 2015 9:25 am
Re: meterN 0.9
ps.
this is the contain of nM_ILIVEMEMORY.json
so not a reason to not show the number of gas 1244.79 in indicator(s) nt logged table
this is the contain of nM_ILIVEMEMORY.json
Code: Select all
{"Voltage1":"225.50","Corrente2":"8.11","frequenza3":"50.00","cospi4":"0.94","Boiler5":"0","Resistenza6":null,"gas7":"1244.79"}
Re: meterN 0.9
Hello,
meterN 0.9.2 is out :
- Updated HighCharts libs
- Pushover need new api key (due to spam). So, you need to save the configuration for each meter
- Bug in indicator if returned a null value
I've also rework comapps_examples (req_espeasy) and also poolmeters, pooler.php allow drift positive correction for pulse meters.
Wishing you a happy new year full of happiness
Bye
meterN 0.9.2 is out :
- Updated HighCharts libs
- Pushover need new api key (due to spam). So, you need to save the configuration for each meter
- Bug in indicator if returned a null value
I've also rework comapps_examples (req_espeasy) and also poolmeters, pooler.php allow drift positive correction for pulse meters.
Wishing you a happy new year full of happiness
Bye
Re: meterN 0.9
Thanks very much Jeanmarc install working perfectly for me.
Nev
Nev
Re: meterN 0.9
Thanks for the feedback Nev. It's also good to know when it work 

Who is online
Users browsing this forum: No registered users and 5 guests