MeterN - Guide with pulse power meter (Italian)

Post Reply
flane
Posts: 89
Joined: Mon Aug 11, 2014 7:22 am

MeterN - Guide with pulse power meter (Italian)

Post by flane » Mon Dec 22, 2014 11:08 pm

I made a detailed guide to installing and configuring Metern on Raspberry with pulse power meter (no arduino).

The guide is in Italian .....

http://www.flanesi.it/blog/2014/12/22/m ... gurazione/

jeanmarc
Posts: 1822
Joined: Thu Aug 29, 2013 7:16 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by jeanmarc » Tue Dec 23, 2014 7:10 am

ottimo, grazie :)

brunopiras
Posts: 2
Joined: Fri Feb 27, 2015 11:19 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by brunopiras » Fri Feb 27, 2015 11:55 am

But it is possible I use it without FV, only with the pulse meter?

sspataro
Posts: 2
Joined: Thu Aug 27, 2015 11:29 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by sspataro » Thu Aug 27, 2015 11:49 am

Hello, I did everything by following your excellent and very detailed guide but, for some reason, is not working. I mean, Metern is correctly configured, takes data from 123solar, but shows them to me, is not the relationship with the counter. If I make a test on java client as a guide, it returns 2(0W) as a guide, then the server java talks but not by any meter reading. I tried with two different readers, one analog and one digital output s0 of the same type that you are using, the standard DIN 43864 as a guide I include photos of this counter,,Image not having found a resistance of 200 ohms, I mounted two 100 ohms on pins that advice in the guide but no, seems there is no dialogue between the meter and the script where I'm wrong?Image and if I go into the dashboard of Metern me from this screenImage I thank you for the work done and whoever wants to help me solve this problem.
Last edited by sspataro on Thu Aug 27, 2015 12:20 pm, edited 3 times in total.

jeanmarc
Posts: 1822
Joined: Thu Aug 29, 2013 7:16 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by jeanmarc » Thu Aug 27, 2015 11:57 am

Please sspataro, speak English for more readability.. Thanks

sspataro
Posts: 2
Joined: Thu Aug 27, 2015 11:29 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by sspataro » Thu Aug 27, 2015 12:19 pm

i've translated my post. thank you

gdrak0
Posts: 8
Joined: Thu Jan 21, 2016 9:41 pm

Re: MeterN - Guide with pulse power meter (Italian)

Post by gdrak0 » Fri Jan 29, 2016 10:39 am

Hi All

I have the same problem ..
In any GPIO pin Ι have tried there was no success..
I always have zero indication 2 (0 * W)
Has anyone found a solution for this ??

Thank you
George

mechanik
Posts: 1
Joined: Wed May 11, 2016 8:11 am

Re: MeterN - Guide with pulse power meter (Italian)

Post by mechanik » Fri May 27, 2016 3:27 pm

is it possible to make a "limited" English installation guide? ... :-)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest