Intermittent values

aurora protocol http://www.curtronics.com/Solar/
Post Reply
Micke
Posts: 45
Joined: Sun Sep 01, 2013 1:25 pm

Intermittent values

Post by Micke » Tue Apr 29, 2014 8:01 am

Hi.

I have done a new installation on my Raspberry PI with the latest software. The graphs display intermitent values. Any idea why? See Image or browse to http://91.195.225.68/123solar/

Regards

jeanmarc
Posts: 1822
Joined: Thu Aug 29, 2013 7:16 am

Re: Intermittent values

Post by jeanmarc » Tue Apr 29, 2014 8:03 am

Check if no other previous instances of 123s is running ps -ef | grep 123solar :o

Micke
Posts: 45
Joined: Sun Sep 01, 2013 1:25 pm

Re: Intermittent values

Post by Micke » Tue Apr 29, 2014 8:24 am

This is the result
http 342 1 0 08:43 ? 00:00:10 php ../scripts/123solar.php
root 2064 217 0 09:23 pts/0 00:00:00 grep 123solar

/Micke

jeanmarc
Posts: 1822
Joined: Thu Aug 29, 2013 7:16 am

Re: Intermittent values

Post by jeanmarc » Tue Apr 29, 2014 8:29 am

It is ok but I am afraid you are victim of the count only by full kWh issue.

http://91.195.225.68/123solar/data/invt ... 140428.csv

You'll need a firmware upgrade :roll:

Micke
Posts: 45
Joined: Sun Sep 01, 2013 1:25 pm

Re: Intermittent values

Post by Micke » Tue Apr 29, 2014 9:18 am

I see.

Thanks!!

emax2000
Posts: 1
Joined: Mon Oct 21, 2013 1:00 pm

Re: Intermittent values

Post by emax2000 » Tue Apr 14, 2015 10:38 am

Please you have to increase the Y value under inverter configuration in the admin page , the default value is 4 you have to change in 8.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests