Effekta ES4600 connection to 123solar

others protocols
Post Reply
justinnp
Posts: 5
Joined: Sat Sep 28, 2019 11:16 am

Effekta ES4600 connection to 123solar

Post by justinnp » Sat Sep 28, 2019 11:18 am

Hi,
I have a question of there is anyone with experience with the Effekta ES4600? Because I'd like to now how tot connect it. Do I need a RS232 to USB converter?

Best regards
Justinn

jeanmarc
Posts: 2022
Joined: Thu Aug 29, 2013 7:16 am

Re: Effekta ES4600 connection to 123solar

Post by jeanmarc » Sat Sep 28, 2019 12:55 pm

Hi,
123s currently use https://sourceforge.net/projects/modpoll/ that use a serial-to-ethernet converter. I not sure you can get data directly from serial port.

justinnp
Posts: 5
Joined: Sat Sep 28, 2019 11:16 am

Re: Effekta ES4600 connection to 123solar

Post by justinnp » Sat Sep 28, 2019 6:35 pm

But how do I connect the ethernet to the raspberry tot read out data? Because I user the ethernet as internet connection?

jeanmarc
Posts: 2022
Joined: Thu Aug 29, 2013 7:16 am

Re: Effekta ES4600 connection to 123solar

Post by jeanmarc » Sat Sep 28, 2019 6:49 pm

You need a serial to ethernet converter, like a "moxa".. Sorry but i don't now much about modpoll maybe get in touch with mstuetz

justinnp
Posts: 5
Joined: Sat Sep 28, 2019 11:16 am

Re: Effekta ES4600 connection to 123solar

Post by justinnp » Mon Sep 30, 2019 11:31 am

Thanks you for the response.
Is there anyone else with some experience?
I connected a power one inverter succesfully but the Effekta is different as I can see so far.

andy
Posts: 71
Joined: Wed May 04, 2016 10:25 am
Location: Ukraine
Contact:

Re: Effekta ES4600 connection to 123solar

Post by andy » Sun Mar 15, 2020 2:22 pm

as i see in this document
http://pdf.effekta.com.de/Solarwechselr ... -4-0_D.pdf (PAGE 78-79)
inverter have rs232 port
you may use usb-rs232 converter like
https://www.ebay.co.uk/c/633216872
OR
buy rs485 convrter OR ethernet card for web access to invetrter in official effekta store

ps sorry for my terrible english ))

andy
Posts: 71
Joined: Wed May 04, 2016 10:25 am
Location: Ukraine
Contact:

Re: Effekta ES4600 connection to 123solar

Post by andy » Sun Mar 15, 2020 2:31 pm

the most optimal solution (however, requires additional equipment)
Image

andy
Posts: 71
Joined: Wed May 04, 2016 10:25 am
Location: Ukraine
Contact:

Re: Effekta ES4600 connection to 123solar

Post by andy » Sun Mar 15, 2020 4:17 pm

Code: Select all

1
                   -->  eth port--> ethernet cable --> internet
RASPB PI -->       usb port -- > USB-rs232 converter --> Rs232 inverter port

2 

RASPB PI --> eth port -->  ethernet cable --> router --> internet
                                                                  -->  ethernet cable --> web board in inverter (SLZBABEKWEBPX00)

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests